Affichage des articles dont le libellé est end..... Afficher tous les articles
Affichage des articles dont le libellé est end..... Afficher tous les articles

mercredi 12 août 2015

Everything goes well without any errors BUT nothing changes in the end....



Hello,

(English is not my mother tongue but I’ll try to do my best :))

I don’t usually ask for help and do my own researchs, but I reached a dead end! So I need some experts here

My Nexus got stolen 3 days ago, so I took back my HTC Sensation from the drawer to use it again for some time. When I was using it before, I flashed 3 or 4 differents roms, I updated the firmware, and so on… Never had a single problem, but I don’t know what I did when I switched with my Nexus, but when I tried to power on my Sensation today, it got stuck on cyanogen boot.
I tried to access the recovery (4ext recovery touch) with ADB, and it worked, so I was kind of relieved! I wiped everything I needed to wipe (following instructions for the rom) and that was unusually long! VERY long! In my memories it took only few minutes to do that, and now it takes 1 hour (actually every action I perform with the recovery takes at least 50 minutes. Was not the case before)! But it goes all the way and I had a success message, so okay.
I tried to flash the rom again (the one I had before and knew it worked), it took once again a very long time to install, but success message at the end. I rebooted and... still stuck on boot loop.

I, then, tried to change the recovery (from 4ext to twrp) (with fastboot), everything went fine (no error during the process), when I rebooted, I was still with the same recovery (4ext). (I also tried to access directly to the recovery without rebooting because I read it was maybe because of the reboot but it’s the same).

I also tried to change the firmware (PG58IMG) from 3.33 to 3.32, I flashed it, process is okay, I rebooted, and… still on 3.33

I finally tried to flash an official ROM from HTC, it worked once again during the process, but the boot screen was… Cyanogen boot, and still boot loop ???

So, I can do anything I want, I don’t get any message of errors, but nothing changes! Nor the firmeware, nor the recovery, nor the rom (which doesn’t work). I’m completely stuck… I tried, and tried again… No apparent changes on my phone. :eek:

My last attempt was going to be with RUU, but I can’t find one that fits my configuration :/

Thank you for any help, I’m desesperate :/

For information, this is what my bootloader looks like :
-Firmware-3.33-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012, 17:33:34


EDIT :
Before I post this, I tried one last thing :
In the recovery (4ext), I formatted all partitions (except sdcard) - no error during the process.
But when I check the info I have :

mount point | fs | size | free
system | ext4 | 787.4mb | 295.4mb
data | ext4 | 1.1gb | 132.0mb
cache | ext4 | 118.1mb | 114.0mb
sdcard | fat32 | 7.2gb | 4.3gb
Current ROM : 11-20140525-Sultan-pyramid

How is that possible? I just wiped everything, and it did nothing. :crying: