Drivers and charging questions

Hi guys, 2 part question for yas!
1) I've just built my new pc and after years of putting it off, went with Windows 8.1 however, Windows doesn't appear to recognise my xperia z and drivers down right refuse to install (even tried installing em via flashtool) so, how do i install em?

2) this might be related to the above problem, but my new pc doesn't charge my phone from the usbs, it recognises something is their and my phone goes into debug mode, usbs and all that lovely stuff works fine in em

Notes : I'm very tech savvy so fire away! Just never been bothered until now to learn windows 8.1 haha!

Phone works fine and charges everywhere else (even in my works i7 machine (also running 8.1 which is weird!)

Cheers guys

Windows 10 drivers for P8000?

Anyone got P8000 to detect correctly in Windows 10?
At first my W10 refused to install driver package cause of driver signing, which was expected,
so i restarted W10 in mode without driver signing and run through the installation without problems.
Still nothing at all happends though when i connect my P8000 via USB to computer...

* Checked USB cable and port
* Checked that USB debugging is on in Dev-options

Suggestions? Anyone else tried?

Can't get Moto RAZR MAXX to connect via Moto DRIVERS

I am using WIndows 10 (Maybe that's the problem) and trying to flash stock firmware onto an XT912 via RSD Light. 64bit Moto driver (6.4) were installed. I put the phone into boot mode, and then connect the USB cable, but nothing happens - After awhile it reboots and the computer sees the phone, but I doesn't get seen by RSD. It seems like it is not connecting via the Motot drivers but just the stock ones. I went into Device manager and made sure all the drivers were updated but can't get it to connect. ANy thoughts o what I can do. I have tried reinstalling the drivers multiple times and they seem to be there, phone is just seeing them.

Install Fastboot Drivers for Windows 10

So I was trying CM12 and it flashed the crappy Cyanogen Recovery over TWRP. I was trying to flash it again through Flashify and other similar apps but it just won't work. I'm now trying to flash TWRP again through Fastboot...but i can't get to install the proper drivers for Windows 10. I tried flashboot drivers and many others I've found online with no success.

How can I get my tablet recognized by Windows 10 ?

Thanks !

[Files] OnePlus Two System Files, Drivers, ROMs, ToolBox

Dear XDA User

This is XQ55 Files fo help you with OnePlus2

OnePlus2 Drivers

OnePlus2 Roms

OnePlus2 ToolBox

OnePlus2 System Files

OnePlus2 Wallpapers

For more Files


If this Files help you you can say Thank you

HTC M9 Drivers

Does anyone have the HTC M9 Drivers?
I keep getting an installation error using HTC Sync downloaded from the HTC website when it gets to the drivers part, and after flashing the RUU my computer will no longer recognize the phone under "adb devices" and I have USB Debugging enabled.

Thanks!

Fastboot drivers

I followed a tutorial on sonymobile.com how to unlock my bootloader, I installed all drivers, android sdk and flashtool but it won't work.
When i look on my laptop under devices i see that the driver "S1Boot Fastboot" isn't found. I cant find this driver for the t3 on internet.
Does anyone has a link or know how to fix this? I got windows 10

How to get and install ADB Drivers for Sony Xperia S

I try to install ADB drivers for Sony Xperia S, but I cannot.
I tried to use one from here
http://forum.xda-developers.com/show....php?t=2635830

but each time I get this error message "DPInst.exe does not execute on your current Operating System". I have Windows 7 64bits.
Maybe somebody can help me with that problem?

How to Install OnePlus 2 USB drivers on WIndows PC

Here is the guide to install the Oneplus 2 USB driver on Windows PC

http://www.technobuzz.net/oneplus-two-usb-drivers/


One of the best and easiest method to Setup ADB/Fastboot files and Install the Proper USB drivers on any Windows PC. :good:

Copy files to internal storage / drivers not recognized

I was trying to install a couple of different custom roms on my phone. I have TWRP as the recovery tool. I tried a rom called ATT Buckeye and it seems to have bricked the phone. I don't have any other roms copied to the internal storage to try to flash them. I can reset to factory defaults both through holding the volume and power down and through TWRP, but I'm not able to start into a system. The only thing I can do is boot into TWRP 2.7.0.0

I saw that I can copy files using ADB, but it says "device not found" when I am connected and run adb shell. I have the drivers from LG's website installed, but there is a yellow exclamation mark on it in device manager. I found a thread where it says that I should be able to get the drivers from the Android developer SDK. I also found the individual download for Google USB drivers. In both cases, Windows isn't able to find any drivers in the USB drivers folder. I'm not sure what else I can do to revive my phone. At this point, I'd like to just get it working again any way possible.

USB Drivers?

I am trying to unlock the boot-loader on my OPO. I have followed all the instructions to the best of my abilities. It is saying no fastboot devices found. I have installed so many drivers I do not know what to do next. I have turned on USB debugging, so I know that is right. Any help would be appreciated.

Windows 10 Drivers

I'm wanting to upgrade to windows 10 but wasnt sure if the current drivers for the s6 edge windows 8.1 will work. Anyone upgrade to Windows 10 and noticed any compatibility issues?

ROM for usb 3g modem connectivity or usb ethernet drivers?

Is there a rom for the Nook HD which supports usb 3g modem connectivity? How about for usb-ethernet connectivity?

Q: How do I add drivers for the 1051F to AndroidX86?

Hey all,

I have successfully managed to boot the 4.4 R3 efi img file from Android X86 on my 1051F. It's working pretty well, very smooth, but pretty much none of the hardware works (GPS, WIFI, Bluetooth, rotation, sound, etc).

Anyone have any idea how we could fix that? The process for getting it to boot is actually pretty easy. You download the img file from the android x86 site, use Rufus to create a bootable USB key (being sure to set it to GPT for EFI). You then need to disable secure boot on the tablet (instructions found various places on the net if you don't know how), shutdown the tablet, connect the USB key via OTG cable to the tablet, hold the volume up and power on. You will get into the NOVO menu. Once there, select boot menu and boot from the USB key (if it's not listed you probably didn't create the USB key in GPT, or it was detected when you powered on).

In order for it to boot into Android, you'll need a USB keyboard connected to select the android option. Alternately, you can just modify grub.cfg to set a default option and a timeout (which is what I did).

I'd really love it if anyone can provide some input on how to fix the missing drivers. Since the 1050 tablet is basically the identical hardware, I would think it should be easy to get the drivers over to this image, but I just don't know how.

Any help greatly appreciated!