Soft Brick (I hope) of an HTC One (M7).

Hi all,

I apologise for this as it seems there are a few soft brick posts to do with the M7 here. I've tried following them but I'm not having much success.
Last night I decided to root my phone in an effort to find a good ROM that looked good but also didn't have the same battery drain as the stock HTC Lollipop update.
Everything was ok to start with. Got the unlock code, followed a process on HTConeroot.com. Other than TWRP probably not being the latest version, all seemed ok. After SuperSU wouldn't start due to the incorrect binaries, I tried to update it through twrp and the trouble started. It would not start the OS and, being the noob, I pressed 'wipe' on twrp and i have no arrived at the following:

I am currently in a boot loop. It will not start the OS. I cannot gain access to recovery mode in TWRP either as the screen flashes up team winning and then just restarts. I can gain access to the Hboot screen and from there can do a USB fastboot link. However, I can't do anything with ADB as it doesn't recognise any device as being connected. Fastboot prompt works fine though.

In a nutshell, I'm looking to get the phone working again. I don't really need to go back to a stock rom - I was looking at google play edition or cyanogen (though I'm told the latter isn't *that* stable). Is someone able to help me?

fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.30
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH3BRW902225
(bootloader) imei: 359405054802754
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4275mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

Phone is stating *unlocked* and *tampered* with S-ON.

how to brick note 4?

Hi, I need to complete brick my note 4 n910f. Already install 4 files kk and lollipop firmware and don't help me. I've random reboots and now always reboots.

I need to complete brick (can't enter in download mode) because I've knox 1 and in the sat they say I don't have warranty because knox to 1.

I tried to put note 3 and n910c firmware and note refuse it.

Any help?

Cheers.

[help] I brick my galaxy s III mini

my s III mini stop working after install a cutome rom
the device now is restart him self stuk in samsung GT-I8190
i can't get to recovery mode just the downloding mode
i tried to flash it with many rom's but nothing :(

Need help with brick Huawei phone

I really need help trying to get the bootloader code my Huawei Y301-A1. When I try to boot the phone up its come up with the message "image signature verify fail". I have tried to contact Huawei for the code, but they wont help. I always tried to use DC-unlokcer but it wont work if my phone is not in download mode. (which I can not get into) The only program that I can get to detect my phone is fastboot and DC-unlocker.

How to repair a hard brick SP

Hello XDA People

I have seen many thread on repair a hard bricked device but no one have worked for me. I explain the context. I have made an upgrade of a custom kernel but something was gone bad and the phone crashed just after. There was no more green light (flashmod) , blue light (fastboot mod) or red light. I tried to unplug battery connector of the mainboard, plug it and charge battery > no red light. I let the phone discharge battery > no red light. So i decided to unplug the battery connector of the mainboard and connect the phone to pc for the flasmod > green light. I have fully flashed the phone without battery. I have plugged the battery and reboot the phone. It is fully Working. Just for share, i don't know if that solution was posted.
Excuse my english.

i lost my pictures after device brick

Hello,
i have LG G2 D802 32GB, after a flash fail my device bicked, i lost all my pictures, is there any solution to restore them?
plz help :(
thank you!

Solution brick lumia

From Microsoft forum:
Hi. Windows phone recovery tool 2.1.1 should fix your phone. try this: connect the phone with pc and hold power button, volume down and camera button about 120 seconds (two minutes) until you hear the windows PLUG IN device sound. Start windows phone recovery tools and if the phone is not recognized, press "my phone was not recognized" button. After that Windows Phone recovery tools (ver 2.1.0 or 2.1.1) should recognize the phone and recover. If this wont help, maybe in some next version of recovery tools will be fix for your situation.
My lumia 640 Dual sim recovered.

Lg l9 hard brick

Hi,
I earlier had cyanogen mode installed in my lg l9 P765. I also had clockwork mode recovery installed for doing the same. Recently i saw a post to flash android lolipop to my phone by artas in http://artas182x.tk/android-projects...timus-l9-aosp/. I installed TWRP . But since i couldnt proceed to enter TWRP recovery, i just tried using `reboot recovery` via terminal. This got my phone bricked as i cannot access my device using ADB or Fastboot. All i see when restarting is the LG logo. And all i can access is the software upgrade mode. Since i had came across such a situation earlier and overcame it using the method to flash new rom offline, i followed the guide given in forum.xda-developers.com/showthread.php?t=2085344 by @cmahendra. But i always got the process stopping at 15% telling that the phone and usb arent connected. I couldnt download any of the roms listed in the same page as the links seems broken. Is there a possible way to get out of this issue?

Thanks

note 2 ota soft brick help!!!!

Hello everyone!! Long time lurker here. just joined and don't know where to go.
I have an att note 2 stock rooted on kitkat.
ota update from net10 today. cancelled it a few times then bam!
phone will reboot in 5 seconds. it did. now it shows updating. then the note 2 screen, then black.
can't get into the bootloader menu.. it just shows that it updating and repeats the process.
samsung says send it in.. gonna have so much lost data if i do that...
ota soft brick is what it sounds like huh? haaallllppp or links!!! please :) and ty

btw i don't know what I'm doing on this site or how to use it very well yet

Soft brick help!!

I've had my nexus 5 for awhile now and decided that I should try to root it. So I followed a guide and youtube and it worked. I then followed a guide to install the android M developer preview, just to check out what had changed. From there I decided to install Cyanogenmod 12.1 . So I was looking at this guide when all of a sudden i noticed my root was gone for some reason. (im new to all this, not sure if that was supposed to happen). So then I followed the same rooting steps I used for the first youtube guide I watched. everything seemed to go fine until i realized that i was in a boot loop. I then decided to go ahead and install Cyanogenmod 12.1 anyway. It worked and my phone was fine. Until i woke up this morning and saw that it was in a boot loop again, but now I can't even get into my custom recovery (TWRP). I dowloaded this program to completely return my phone to stock but every time it tries to flash something to my phone, it gets this "flash write failure" message. Now I'm really lost and do not know what to do. I really rather not buy a new phone.

If anyone can help it would be really appreciated!!! If you do, I will need you to assume I do not know anything, as I'm not very familiar with everything.

Nexus 7 2012 Hard brick after downgrade?

Hello guys! I come now to the point ..

I bought the Nexus 7 WiFi only for in-car use .. When I received it, had the CyanogenMod 12.1! so I decided to install the rom AUTODROID 1.2! I downloaded the ROM, install the .zip TWRP (latest version) and so I had a bootloop .. Restore backup done previously with TWRP! I am looking online and I see that making the dowgrade from lollipop kitkat, first I had to flash the rom original KitKat!

ADB and fastboot drain, drain the "ROM" (the right one for the Nexus 7 2012 wifi), reboot into fastboot mode and do the command .bat adb .. but something went wrong

"Fastboot.exe stopped working"

From here you have begun problems: recovery is no longer accessible, and restart I always brought to the fastboot mode! I had the bright idea to turn off the tablet ...

From here .. Black screen, fastboot mode is not available, recovery is not available, so I can not even give commands ADB .. When the connection to the tablet pc, windows gives me input connection, but during the driver installation I give me the error "Unknown Device" ..

I do not know what to do .. Can you help?

Mi3 Weird Hard Brick

My mi3 hard bricked and I followed this thread but no luck
http://en.miui.com/thread-73348-1-1.html

Problems :
1. phone was unable to get detected when battery is not connected and pin is connected to testing points (just red light blinks 0
2. phone gets detected when battery is connected but as "USB INPUT DEVICE" and "HID companion" not as Qalcomm HS-USB
3. Tried miflash but no detection

HELP ME PLEASE its completly dead
dont post on flashing through fastboot or recovery
NEED REAALLL HELP

HTC Desire 510 D510n BRICKED(just like a brick) Solution?

HTC Desire 510 D510n BRICKED(just like a brick) Solution?

Just received an Htc desire 510 D510n Completely dead.When Connected on pc, it s detected as HS-USB QDloader 9008 After drivers it shows as NOKIA EMERGENCY CONNECTIVITY.
NO vibration,no light no temperature phone clean.
I ve no history with the phone.

Any similar case here?

TX

brick samsung pocket s5300

:crying:pahelp po nag try ako iroot sg5300 nag dead phone na sya,anu po magandang gawin maliban sa dalin sa samsung care?kung dadalin ko un dun magbabayad pa ko?TIA

brick

i hardbricked my moto x 2014. And i found a way to fix it, or that should have fixed it.

http://www.usoftsmartphone.com/t300062.html

But When i do everything and i open the .bat file i get an error message at the end.


C:\Users\USERNAME\Desktop\Blankflash\blankflash>.\ qboot.exe blank-flash
opening device: \.\COM4
OKAY [ 0.016s]
greeting device for command mode
OKAY [ 0.000s]
identifying device
...serial = 0xSOMETHINGIHAVECENSORED
...chip-id = 0x7B4 (MSM8974_PRO)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.010s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.006s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.003s]
sending programmer
OKAY [ 0.008s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)

C:\Users\USERNAME\Desktop\Blankflash\blankflash>pa use
Press any key to continue . . .



Is there anything i can do about that?

[6045i]Do FULL unroot before updating or Phone = Brick

Several people have indicated just unchecking superuser and installing the latest 08/10 update is NOT sufficient. They get into boot loops and since the update also restores factory recovery there is currently no way to fix them.


Either do a full unroot and reboot before updating or flash the already updated firmware in the system image thread.

Ironically the Idol 4.7 models DO have a reboot to bootloader in THEIR factory recovery but that doesn't help US at all. Thanks ALCATEL.

Total brick

Hello,

I have a T-Mobile LG G2, I've tried to root it up it fails. After that it always stuck on T-Mobile logo.
I've tried using the power + vol down button, it goes to Factory Reset but after seeing a splash of Android Erasing, it boots and goes back to the T-Mobile logo and stays there forever. I've also tried the vol up but no dice.

How to fix this ?.

TIA,

John

Hard Brick GT-I8552 MT6572 China

Galaxy Win GT I8552 MT6572 China hard brick no light no power ON no recovery no fastboot mode nothing when connect with computer its detects as MTK usb port i tried many flash file through SP Flashtool but DRAM_error found
Any one have clone flash file please share.

Attempting to recover from soft brick

I have been trying to recover from a soft brick that suddenly happened on my phone, I think I can fix it as I can get into fastboot..

However I am trying to flash system and I am getting a write failure.

I am using this guide: https://docs.google.com/document/d/1...2XP6wjJE4/edit

and the latest stock android (the newer 5.1.1.)

I was having problems before in steps before that but I actually found that doing a fastboot oem lock / unlock and then trying actually let me get farther then I was able to before (before it failed on the bootloader-hammerhead part)

Brick problem please help!!!!!!

Alright I installed CHAINFIRE 3D which resulted in a BOOT LOOP. My android is a LG G3 it has stock OS and it is rooted. For some reason I can't boot to recovery and I don't have a CUSTOM RECOVERY, I tried to get one but It wouldn't reboot to recovery and to use it I had to redownload it as a update and open it when its done. I am aware of applications such as ONECLICKROOT but my android will not pop up on my MAC and I do not know if this is a result of driver issues or because I did not turn on usb debugging. I also have a 64 GB micro sd card if thats any help and I also do not have any experience with boot loader. SO CAN SOMEONE PLEASE HELP ME!!!!!!!!