App to flash recovery

Is there any app that can flash recovery even of tar files cause flashify requires img files which is kinda impossible for few device. So help me if any android app that will flash recovery with tar files.

flash Xposed | "cp: write error: No space left on device"

Hello, I have a Problem while flashing Xposed.
I have the current TWRP and Firmware Version

Yesterday I had install the custom Rom ViperOne on my device.
Then i want to flash Xposed. But every time TWRP shows : "cp: write error: No space left on device",
but my storage have more than 10GB free space.
Please help

Does Oneplus 2 can flash Android stock rom or not now?

Knowing OnePlus 1 can flash Android stock rom, but not sure OnePlus 2 still work or not.
Anyone can advise? Thanks.

[HELP] Can't flash TWRP Recovery

I Flash TWRP & CM 12 earlier everything works well...but one day I back to stock ROM which also locked the bootloader. Then I try to unlock the bootloader with earlier unlock code but it giving error like

(bootloader) Failed to erase partition
(bootloader) General unlock failure!
(bootloader) OEM unlock failure
FAILED (remote failure)
finished. total time: 10.212s

Otg flash drive

Hi,
Does anyone have experience of the 'otg' flash drives working with our device?
Thanks

Sent from my GT-N8000

flash RUU file ( Error )

please help me ...

Quote:

C:\Users\Desktop\platform-tools\platform-tools>fastboot flash zip PP.zip target reported max download size of 1542111232 bytes sending 'zip' (1304199 KB)... OKAY [ 51.921s] writing 'zip'... (bootloader) zip header checking... (bootloader) shift signature_size for header checking... FAILED (remote: 32 header error) finished. total time: 52.170s

ZL2 doesn't want to flash to stock rom

hi there, i hope you are all doing good

i have SOL25 ( ZL2 ) and when i bought it it had a rom ( D6563 ) which is Z2a rom so i put the sim unlock pin and i wanted to flash the SOL25 rom using flashtool but i get error everytime, i flashed back ( d6563 ) and it is working for now
if i repair it with sony companion and say it is ZL2 while he is ditecting it as Z2a, would that work ? or i have to flash a stock rom first

1. is there a side effect for keeping D6563 rom ?
2. SOL25 is supposed to be 32 gb but i only get 11gb, is it cause the rom is not the stock one ?
3. can you give me a link to the stock sol25 rom ?
4. do you know any way to flash the original one ?

thank you

Rooted Galaxy S4 Min "firmware upgrade encountered an issue" Error, Cannot flash through Odin

Hi me when my phone root was the novel that would update and now I 'm on the phone with the following error encounter :
(firmware upgrade encountered an issue . please select recovery mode in kies and try agin)
When they want to flash my phone odin fail option comes up

Help me please

[Q] Dirty flash 4.4.4 NJ5 to Lollipop?

My wife and I just purchased the AT&T US version Galaxy S4 I337 brand new in box with NJ5 4.4.4 firmware stock everything. No rooting nothing. Over the air updates brought in a 485 megabyte update three times. The first two failed, while the third attempt apparently succeeded.

I have checked updates twice since and it states "Current." In the "about phone" section it lists "Official" now.

I am EXTREMELY familiar with flashing custom and stock roms to my T-Mobile SGH-M919. I have downloaded the AT&T 5.0 Rom. Can I just dirty flash with Odin? Does the phone's locked bootloader prevent the Odin flash? Any tips or hints on this would be great.

I downgraded my T-mobile S4 to 4.4.2 from 4.4.4 with ease. With the AT&T be just as easy with the 4.4.4 to 5.0.1 with Lollipop?

cheers for any pointers or thoughts.

After factory reset I get "setup wizard has stopped" but I'm not able to flash my rom

Hi all

this is my first post so please be nice to me if I do something wrong.
Ok, where to begin with my long list of problems...

1. I have an Evercoss A28b bought in Indonesia but manufactured in China. It has Mediatek 6972 and SW version is ALPS.JB3.MP.V1.40 (that's what I could find in the phone's factory mode)
2. I rooted it 2 months ago and put all my apps and data on it from my old phone with Titanium Backup. I had some minor problems in the beginning but fixed them all and the phone was running smoothly.
3. This morning I froze "Go Launcher Z" because I didn't like it anymore and wanted to try how my phone looks withour it. Since the moment I froze the app nothing happened. I couldn't access the home screen or the app drawer but only my recently used apps when pressing and holding the home button.
4. I wanted to reboot my phone but it kept booting and booting, saying "android is upgrading" all the time. After one hour I took out the battery and now it's dead.
5. I tried to reset it into factory mode and first it seemed to work because it asked me to do all the settings like language, google account etc. As soon as I was finished a window appeared with "unfortunately setup wizard has stopped" and now I can't even see my homescreen or anything. My screen is black apart from the battery, wifi and SIM icons in the top right corner.


Now, what I tried to do:

1. I googled and found a few solutions saying I should flash my rom. I googled and found the sp flash tool and a rom for my phone.
2. SP Flash Tool did not recognize my phone and there was no scatter file in that ZIP file that I had downloaded.
3. I downloaded MTKdroidtools to try to generate a scatter file from my phone and a lot of different drivers but none of them made my phone connect with DroidTools.
4. So I went back to SP Flash Tool and googled for hours in order to find a scatter file and make my phone connect with SP Flash Tool. I managed to find another rom, this one had a scatter file in it and I also managed somehow to connect my phone with SP Flash Tools. It was only recognized after I had selected the scatter file and pressed the download button though.
5. SP Flash Tools brought an error message saying my pmt has changed and I need a new one or something like that. Unfortunately I can't even re-do this to give you the correct error message because I can not connect my phone to the PC any longer. Everytime I do this with battery or without it keeps connecting and disconnecting all the time.
6. I am at my wits ends and don't know what to do any more.

Please help

Samsung Galaxy s6 Edge Gold Tmobile 5.1.1 Root and Flash and TWRP Help

I have a tmobile galaxy s6 edge i have followed all guides step by step
i have rooted and flashed many phones
here are the facts
I have 2 windows computer
both are win 10
i have samsung drivers installed
i have odin 3.10
i have tried atrium and many other roms
i have restored to the stock bootloader kernel and recovery
I tried atriums bootloader and baseband
Everything works besides before i try to flash the atrium rom
i try to transfer the rom via usb and it just gives me a frozen error saying cant copy this file
i did manage to copy the file to the internal storage but have never sucessfully installed the rom

[Help] G900A unable to flash with ODIN trying to bring phone to stock - was towelroot

Hi,

I am trying to unroot my wife's Samsung Galaxy S5 SM-G900A. I went ahead and did unroot via SU, then reboot. I've done a reset/wipe via recovery mode which was successful this was all after attempting to flash to stock ROM and it kept failing. I was hoping unrooting and wiping data and cache would help but none has I keep running into the same problem in ODIN see below:

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)


I have tried multiple Samsung branded USB cords in multiple USB ports (even on multiple computers) all with the same issue. I went ahead and downloaded the G900A PIT file and tried to install that with ODIN but that failed as well. I have debug mode enabled it didn't change anything. I have also used multiple versions of ODIN both v3-1.85 and v3-3.07 both produce same error.

the rom I'm trying to flash to is: G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar .md5 the PIT I ended up trying was SM-G900A_pit.pit.

This phone was originally rooted with towelroot I think at one point I put a ROM on the phone after an update came out that took root away. That rom allowed me to re-root with towelroot and I ended up freezing a ton of the apps and the autoupdate so it wouldn't ever happen again.



Model Number: SAMSUNG-SM-G900A
Android Version 4.4.2
Baseband version: G900AUCU2AND3
Kernel version: 3.4.0-2178781 dpi@SWDD5701 #1 TUE JUL 22 13:58:46 KST 2014
Build Number: KOT49H.G900AUCU2AND3


If anyone could provide any help in getting this phone back to stock I would really appreciate it

[Q]how to port custom recovery and flash method for bootloader mode on dazen 1

device name is coolpad dazen one (8297L-I00)
having Qualcomm Snapdragon 400/410 1.21 GHz cpu
architecture - 4x ARM Cortex-A53 @ 1.21 GHz
Board- msm8916
2 gb RAM
295 dpi
8 gb storage (4 gb system +4 gb internal)
running on 4.4.4
API level - 19
build ID - 4.4.150.00.T1.150528.KTU84P
java VM - Dalvik 1.6.0
openGL ES - 3.0
kernel architecture - armv7I
kernal version 3.10.28-gb76285c-00075-gdf72c7d(1501731)
(rooted)
i need a CWM recovery for my device
i found a device same as my device (coolpad/yulong f1 plus ) but with minor difference like name ,model etc
it is from the same manufacturer there are 6 version available 3 of MTK and 3 of qualcomm based chipset
i tried to flash recovery which was for f1 plus but it soft bricked my phone or something else all it was showing was bootloader mode
somehow i managed to flash stock recovery via bootloader mode using a batch program developed by cool community which was for flashing recovery on f1 plus
then i decided to port recovery by myself but there is no guide for porting recovery for qualcomm device using windows (as i don't possess linux or ubuntu os)
please help me out
and please tell me if i missed something
thank you in advance......

I can't flash any rom or kernel without failure. Please help 7t software

Here is a unique one, lets see if anyone has an answer/suggestion...

I have an att 850 LG G3. In stock form here is the sofware information:

Android 4.4.2
Baseband Unknown
Kernel 3.4.0
Build g3_att_us-userdebug 4.4.2 KVT49l
Software D85007t

I have successfully rooted the phone and installed twrp.

When I flash to anything (Cloudy, Spartaxx, Darknight, stock lolipop, d850_20f) I get invalid battery error. When I flash back there is no battery issue. The batteries are fine I have two original batteries and both are charged to 100%.

When I tried to just flash a new KK kernel (d850-rin-1.7) the phone said security error on bootup.

What should I try next? I prefer to stay on the stock rom. My goal is something like cloudy where I get a faster less bloated phone with less heat and lag while getting better battery life but maintaining my camera.

Thanks

How to get Flash to work on 12.1 in browser

I have tried my darnedest to get flash to work reliably. I use Dolphin, but it's doesn't always work properly on some videos. Any suggestions?
TIA.

Sent from my SM-T320 using XDA Premium HD app

Lenovo Yoga 10 HD+ won't boot after flash

After trying to update my Lenovo Yoga 10 HD+ (B8080-F) with a rom from MIUI, the tablet won't boot anymore. It won't even power on. Is there a way to flash it with the stock ROM? If so, would somebody be kind enough to provide a guide with links to the programs that I would need? I know that with Samsung devices you can use Odin to flash stock roms. Is there an equivalent tool for Lenovo tablets?

My Samsung Infuse 4G can't flash anything!?

So, I have an Infuse 4G and I wanted to update it to either Jellybean or Kitkat.
I found tons of ROM that I wanted to try but I gotta install CWM first and here's the problem:
LITERALLY NOTHING WORKS.
CUSTOM KERNELS DOESN'T WORK.
ROM PACKAGES WITH CWM DOESN'T WORK.
MODIFIED 3E RECOVERY DOESN'T WORK.
SGS KERNEL FLASHER DOESN'T WORK

:crying::crying::crying:

ACTUALLY, EVEN ROMS DOESN'T WORK.
WHETHER STOCK ROM OR STOCK MODIFIED.

Here's the funny part: LITERALLY NOTHING WORKS EXCEPT UCLB3 and UXG3. :rolleyes:
(UCLB3 with PACKAGES DOESN'T WORK)

I tried other stock roms but no luck. :(
PLEASE HELP! BTW what I mean to say is... UCLB3 and UXKG3 are the only roms
THAT CAN PASS THROUGH THE SAMSUNG LOGO. :crying:

My Samsung Infuse 4G can't flash anything!?

So, I have an Infuse 4G and I wanted to update it to either Jellybean or Kitkat.
I found tons of ROM that I wanted to try but I gotta install CWM first and here's the problem:
LITERALLY NOTHING WORKS.
CUSTOM KERNELS DOESN'T WORK.
ROM PACKAGES WITH CWM DOESN'T WORK.
MODIFIED 3E RECOVERY DOESN'T WORK.
SGS KERNEL FLASHER DOESN'T WORK

:crying::crying::crying:

ACTUALLY, EVEN ROMS DOESN'T WORK.
WHETHER STOCK ROM OR STOCK MODIFIED.

Here's the funny part:
LITERALLY NOTHING WORKS EXCEPT UCLB3 and UXG3. :rolleyes:
(UCLB3 with PACKAGES DOESN'T WORK)

I tried other stock roms but no luck. :(

PLEASE HELP!
BTW what I mean to say is... UCLB3 and UXKG3 are the only roms
THAT CAN PASS THROUGH THE SAMSUNG LOGO. :crying:

HowTo flash via adb or fastboot?

Hello,

I updatet my SlimKat Rom from an weekly to "Slim-honami-4.4.4.build.9.0-OFFICIAL-8317".
After that the screen stays black. But the phone works, I get message notification, the Touchscreen vibrates, the alarm works...

Now I won't loose my data and settings. Can I flash the image or the previous again ( it stay on the sd card) via adb or fastboot without touching the phone?

I can enter TWRP, the lights told me (from red to purple and yellow) and it still works. My phone vibrates when I touch (the huge buttons) but I can't see anything.

I've to wipe Dalvik and cache. NOT A FULL WIPE. And install the "Slim-Honami***.zip".
Or maybe can I repair the graphic driver or device?

Thanks you all

When I had the one m7 you could flash different radio versions

I was wondering if you could do the same for the m9. Currently I have a sim unlocked t-mobile m9 while using AT&T and I cannot get LTE to work properly. I was wondering if they were different radio versions I could try to see if an older or newer radio can fix this.