Is there away to a make this phone on into the T mobile version?

If even of its running the OC1 5.01?

Sent from my stang5litre Edition 5.0 using Tapatalk

Verizon gs3 will not boot into recovery

Hi, I recently flashed twrp on my verizon gs3. I trieed rebooting into recovery, but it said system software is not authorized by vzw. Every time I tried to boot, it just says this. I have to enter download mode every time I do this to reboot. Why is this happening? I just want to flash cyanogenmod 12.1. Twrp is compatible. Please help! I hate touchwiz:confused:

Unable to sign into Sprint Zone app

Anyone able to sign into the Sprint zone app?

When I try to sign in, I get the following error.

Trick Kies into thinking your device is unlocked

Hi, thanks in advance for helping.

This is the situation.
I want to backup as much as possible items from my phone since it's broken, but:

- The screen is broken
- Device is locked
- USB debugging is DISabled.

I already searched a lot and tried the cmd adb commands to unlock it, but since usb debugging is disabled my device is not found..
I also tried to unlock my device using findmymobile, but somehow it won't unlock it.

I am now able to get Kies to recognize my phone (using recovery mode) and Kies of course noticed my device is locked.
Before I go to the store and buy that OTG cable, I was wondering if there is any way to change the registry of Kies and trick it into thinking my device is not locked. Sorry if this is a really weird question to ask.

OR is there any other way I can unlock my phone from my laptop? I know the pin code, so that is not the problem.

Thanks in advance.

Can't boot into recovery.

Hello,
So I have a P7 at B126. I tried rooting it with kingroot and tried to install TWRP. I got to the part where you have to use fastboot to flash the img and it fails so I gave up. Now I am trying to get into recovery and I can't. It just either goes to a black screen or a Boot failed screen.

Thanks in advance

Getting Themed Apps into Android M

I am certain many of you have taken the plunge into Android M, and I think the latest revision is worthy of daily driver status...

I for one was reticent to stay on it for extended periods, mostly because of the trade-offs involved with the scores of feature rich, mature 5.1.1 roms on the one hand, and the comparatively stock experience inherent with a new operating system...

Then there is the ever-present desire on my part to run themed apps, be they hard coded, or stock variants that can be fully themed with either a theme engine overlay or layer...to me, white UIs should simply be illegal.

But as I have come to use the latest M, I have found it to be a joy to use. This was made certain with the availability of the hard work of Team BlackOut (Bryan, Andrew, Patrick, Kevin) and @daveyannihilation, whom have brought us themable versions of apps I regularly use.

So, with Android M having what seems to be system wide Runtime Resources Overlays (Sony's contribution to Android, RRO), we have a superb slate with which to work.

So with that out of the way, here is my current approach to getting Android M running the way I like...

Hard Coded Themed and Themable Apps

These are always perfect...either perfectly coded or ready for a good theme.

Team BlackOut and Davey Wilson have given us with their latest themable Gapps versions of...

Gmail
Google Plus
Hangouts
YouTube

https://www.androidfilehost.com/?fid=24052804347798131

Thyrus has provided his flashable add-on for his themes, and these include:

Clock
Calendar
Google Messenger
Hangouts
Play Store
Google App/Google Now

https://www.androidfilehost.com/?fid=24052804347794202

And Team BlackOut has given us hard coded versions of a plethora of other apps, including Play Music, Play Store, Google App...the list is endless (check the TBO updater app for details).

To get any of these onto your device and running properly, they must remain in the system partition...

So, to attain that, here is what I suggest you do...keeping in mind that this assumes you're running one of the latest preview M builds...

1. Download one or more of the above referenced zips
2. Unzip the file and its contents
3. Now, we're going to be pushing these apps to the existing location on M, and leaving what remains intact...here's where this gets a little less intuitive...

3.1. Straight Apk Swaps...

In this first example, I'm replacing the stock clock with the one from Thyrus...

Using Root Explorer, go to system, app on the left pane, and the location where you unzipped the package from Thyrus on the right...

As you can see, the file names are different, but the packages are interchangeable...so, I moved the stock M version in system to a safe location on my internal memory, renamed the one from Thyrus, pushed it to system, app, set permissions to 0644, and left the Odex subfolder and its contents intact...

And the final outcome...

3.2. Movement of Files with Library Files

In the M version of Google Plus, Hangouts, Google App/Now, YouTube, and a few others have only the apk, whereas the themable version has both...so, to get these to work without crashing on you, you'll need to push both the library files and the apk from the zip (either the themable version or the hard coded one)...

Using Root Explorer, go to system, app in the left pane, and the source zip in the right...

You'll note that the stock Google Plus included in the M Preview has no library files...you'll need to push those to system in order to get the themable version working...again, leaving the oates subdirectory and Odex file alone...

Copy the entire folder labeled "lib" from the themable zip to system, app, PlusOne, then set permissions for the new folders to 0755, and for the library files to 0644...
First, copy the folder, then set folder permissions...hard press on the folder name, and choose "permissions" from the popup list...

Then change folder permissions for both the "lib" and "arm" folders, as below...

That should do it.

Now, Google Plus will look amazing...i personally love the Material Glass theme for this app

As will Hangouts, and so many others...

4. Odds and Ends...
4.1. Tethering, seems to be a hit or miss proposition...no worries, using SQLite, make sure tether provisioning is set to zero...in the latest JDX rom (3.01), it was not...

Open the app, then go to settings storage, settings.db, global, then look for the line that reads "tether_dun_required." It wasn't there for me...so I added it...by hitting the plus sign in the top right...

4.2. 4x1 Reboot Menu, a few quick replacement apps, such as Quick Boot or Power Toggles and you'll have this immediately...

I hope to grow this list, especially as mods get on the grid...I would love to have a volume wake mod, and some others.

One final note...Please BUY premium apps, etc...like Root Explorer, SQLite, and of course, your favorite themes...it is a terrific way to show support to the dev, and it's usually less than you'll spend at Starbucks.

I hope this helps.

Happy flashing!

Sent from my Nexus 6 using Tapatalk

Cant get into recovery

Hi all

I cant get into recovery. Flashed a few variants of recovery. Followed some threads. But i cant get s-off without recovery, and flashing a few variants of recovery doesnt work..

Please help..

Importing stock ringtones into custom rom

How do I do it?

Sent from my XT894 using Tapatalk

Htc One not booting into custom recovery

Hey guys!
I wanted to root my HTC One M8 and ran into a little problem doing so.
This is what I have done:

• Unlock bootloader through HTC Dev


• Flashing the unlock.bin


• Bootloader is now unlocked


• Flash TWRP


• Erase cache


• Boot into Recovery

However, instead of seeing the familiar TWRP screen like on my previous phones, the phone shuts down completely after shortly showing the HTC logo. This is my getvar output:

Quote:

version: 0.5 version-bootloader: 3.19.0.0000 version-baseband: 1.0.U20410.1@50408 version-cpld: None version-microp: None version-main: 1.11.401.2 version-misc: PVT SHIP S-ON serialno: HT547YS00641 imei: //obscured imei2: Not Support meid: 00000000000000 product: m8ql_ul platform: hTCBmsm8939 modelid: 0PKV10000 cidnum: HTC__031 battery-status: good battery-voltage: 0mV partition-layout: Generic security: on build-mode: SHIP boot-mode: FASTBOOT commitno-bootloader: d5ccbaf7 hbootpreupdate: 11 gencheckpt: 0 mfg-name: 0001

I have tried multiple versions of both TWRP and CWM, but neither do anything. It should also be noted, that when the cable is still plugged in, the orange low-battery indicator LED starts blinking, together with my screen flickering on and off (intervals of 5 seconds) with big battery charging sign on it. Could this be a battery problem? The phone boots normally into the Stock ROM.

Temporary boot into TWRP?

So, I just got the phone and I've unlocked the bootloader with instructions from another site because none were here in a sticky as most phone sections on here have, and how to root and install recovery isn't on here either (This isn't a criticism or shot at this section, I know this is a new phone and these things take time). Though I know how to do most of this from years of doing it, I do not want to flash a custom recovery permanently just yet, but I do want to root. A lot of phones have toolkits or something that will allow you to boot into TWRP temporarily to root, but I don't seen anything available for this phone yet to do this. Does anyone know if this exist, and if not when it may? Once again, I know this is a new phone and development will pick up over time, just curious.

Attempting to root, won't boot into custom recovery.

I'm following along this video. https://www.youtube.com/watch?v=GNgg1_JZrSE

I downloaded the files, opened and ran odin, that went well, I copied the SuperSU file to the root of my tablet storage and powered off. Unplugged the USB and booted into recovery using power and volume up. But his screen looks custom, while mine looks like the default screen with a big "No command" message, with options like reboot system now, apply update from ADB/external storage, etc. How do I get the custom display to show up like his does at 9:19 in the video. Thats where Im stuck at right now :(

Booting into recovery shows "no command"

Hi ... I just rooted my moto g 3rd gen 8GB . It seems all are working fine.

I installed TWRP recovery from here
and Superuser from here

Root is done. But when I am trying to boot into recovery I am getting "no command" message with a black screen background and android laying down ! Can anyone please help me to fix it? Thank you,

Cannot boot into TWRP after flashing CM12.1 nightly

Hi.
Today I wanted to upgrade from CM11 to CM12.1, but I had to upgrade the bootloader first. It all worked and I'm now on bootloader version 41.18.
When I flashed the ROM it flashed in 20 seconds from an USB stick. It seemed a little to fast. When I rebooted it worked fine and I was on Android 5.1.1, but after installing SuperSU and rebooting I stuck into a bootloop.

I'm now in a bootloop and when I try to enter the recovery the TWRP splash screen comes up, but then it goes into the bootloop again.

I have the XT1032 and my TWRP version is 2.8.6.0 and I have a TWRP backup from CM11

If someone could push me in the right direction how I can access TWRP then that would be great.

Thanks in advance.

Turning an android into an FTP?

Hi All,

I am currently working on something, which sounds simple in some respects.

I need my spare android phone to act as an FTP Server - Easy enough done on a LAN, but I need to make it accessible across the internet, as I need to get a service I use to send files to my phone via FTP (its a long story, but the service can only email large files automatically, and they exceed the average 25mb size limit - or they can FTP - no other transfer method is available). I also need to use my mobile, as all the internet access I have whilst on the move is via my mobile, and I cannot setup the network at home to do port redirect, so its basically the phone has to be the ftp server (and seemingly the router)

Rather than buying an FTP and webspace, I have read up on a few things that can be done. I have downloaded "My FTP Server" and set that up on my device, which is accessible over the LAN. I then downloaded Port Forwarder, and configured the incoming port, redirect outgoing port and the loopback IP of my phone to direct traffic.

I then signed up to http://freedns.afraid.org/ and created a subdomain, which when I input the current IP Address of my device on the Internet, resolves correctly, so it can see the IP correctly.

Theoretically, I can see no reason why this is failing. I appreciate the limitations are the network will by default disable ICMP Ping requests, and the IP address is Dynamic (though I can change it on demand as and when I need the files!) but beyond that, I cannot see what to do here.

Anyone got any suggestions?

The device is as follows:

Landvo L900
Dual Sim, 3G and 2G
Android 4.2.2
Device is rooted

I appreciate any advice you can offer!

How can i boot INTO fastboot?

Simple question that seems to confuse people when asked so I'll try to be as clear as possible. I power on into bootloop LG logo. I can boot into only download mode. When I try to get to recovery it just starts the phone into bootloop after I hit power for factory reset. I need to flash partitions again because I believe I can fix the phone. Using lgflashtool errors while trying to flash stock rom. So I'm stuck. Anyone know how to make the phone go to fastboot?...Please!!!!?

Cannot boot into download or recovery mode

Hi, my samsung Tab2 is stuck at the "Firmware upgrade encountered an error" screen. No matter which combination of buttons I press, I cant get into download or recovery. I've tried flashing with Odin, it shows successful but nothing has changed. I tried the ADB command but it says "Waiting for device". When I plug in the tab to the charger (or when I connect it to the PC) it comes on automatically with the "Firmware upgrade encountered an error" screen. Is it a power button thing or is it something else ?

Thanks.
Sachin

Phone only boots into TWRP

I decided today to try and root my phone and followed the steps on this tutorial: http://forum.xda-developers.com/nexu...-root-t2266654

I had unlocked my phone and installed the latest version of TWRP. Now I can only boot into TWRP and bootloader. My phone is not being picked up by my PC. I tried a factory reset and format of data on TWRP but my phone still only boots into TWRP.

Is my phone permanently bricked?

Any help will be greatly appreciated

Help! i cant boot into recovery or restore factory settings (secure booting error)

I am on stock kitkat ATT Lg optimus g pro e980, i cant boot into recovery or restore factory settings, all i get is
Secure booting Error!
Cause: boot certification verify
but i can boot normally.....i have been able to boot into TWRP recovery and install a few custom roms some time ago, this problem started after i restored TWRP backup. I read somewhere that the bootloader is locked, i tried using freegee but it doesnt work
when i start up freegee



after selecting a rom it downloads and stays like this like forever

when i minimize and go back to it

Note stucks on Samsung Logo and wont boot up, able to get into download mode and TWRP

Hi,

So my note 2 was working fine yesterday (rooted) until a security update informed that I need to reboot my phone, now it's stuck with samsung logo and nothing else. I tried to wipe cache but it's failed to, able to factory reset using TWRP.

NO OS installed and unable to recognize ext SD card (FAT32). what should I do? Is it bricked? it's the N7100 model International.

Edit: I also tried to flash twrp and CWN but it shows up as "Failed" on odin.

Thanks,

[Q] Stuck on bootanimation, Can't get in into recovery, No usb debugging

Excuse me everyone. I'm sorry if my english bad
My phone just stuck in bootanimation after flashing CM11 using TWRP. I can't get into recovery or download mode because my home button is not working. When I connect my phone using USB into laptop, my phone detected as SAMSUNG Mobile MTP Devices with yellow sign. So I'm trying get into recovery using ADB Command but my phone not detected in adb, I can't see Android Composite ADB Interface in my device manager.
Any Suggestion ? Please help me :crying: